J56J_8S11-EA-03G_Edition1.book
Page 34 Tuesday, June 24, 2003 6:29 PM
Maintenance and Care
Owner Maintenance
License plate lights
w Replacing Interior Light Bulbs
1.
Wrap a flathead screwdriver with a soft
cloth to prevent damage to the lens and
remove the lens by carefully prying on
the edge of the lens with a flathead
screwdriver.
Overhead light/Map lights (With
overhead console)
1.
Remove the screws.
2. Wrap a flathead screwdriver with a soft
cloth to prevent damage to the trim and
gently insert it in the overhead light as
shown in the figure, and then remove
the overhead light unit.
2.
Disconnect the bulb by pulling it out.
3.
Install the new bulb in the reverse order
of removal.
3.
4.
Turn the socket and bulb assembly
counterclockwise and remove it.
Disconnect the bulb from the socket.
Socket
5.
Install the new bulb in the reverse order
of removal.
8-34
Form No. 8S11-EA-03G
Product Specification
Categories | Mazda 6 Manuals |
---|---|
Model Year | 2004 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |
i bouth this car and i need the manual
Convenient. Needed Content. Thanks.