High beams, parking lamps
1.
The lever shown:
>
>
Right turn signal: press downward
Left turn signal: press upward
The illustration shows the front left side of the
engine compartment.
2.
3.
Remove the bulb holder towards the rear.
Remove and replace the bulb.
High beams
Bulb 55 watts, H 7
1.
Remove the cover cap 1 by pressing the tab
and removing the cover cap upward.
Turn signal lamp 2
Bulb 21 watts, WY 21 SV
2.
Press the bulb holder from above to release
it.
Bulb replacement for the turn signal lamp 2 is
possible via the wheel well.
3.
4.
Remove the bulb holder.
The illustration shows the left side of the vehi-
cle.
Remove and replace the bulb.
1.
Turn the steering all the way to be able to
remove the cover, refer to illustration.
Parking lamps
Bulb 10 watts
2.
3.
Turn the ignition key to position 0.
Bulb holder and reflector are one unit and
are replaced together.<
Unscrew the two bolts using the open-end
wrench from the onboard tool kit, refer to
page 180.
1.
2.
Turn the bulb holder 2 to the right and
remove.
4.
Turn the bulb holder to the left and remove,
refer to arrow.
Press the snap connection on the plug con-
nector, pull off the bulb holder and replace.
Front turn signal, sidemarker
Your BMW is equipped with two turn signal
lamps per side in the front.
Turn signal lamp 1
Bulb 21 watts, WY 21 SV
The illustration shows the front right side of the
engine compartment.
5.
Remove and replace the bulb.
181
Online Edition for Part-No. 01 41 0 158 445 - � 09/04 BMW AG
| Categories | BMW 6-Series Manuals, BMW Manuals |
|---|---|
| Tags | BMW 645Ci, BMW E63, BMW E64 |
| Model Year | 2005 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(2 votes, average: 4 out of 5)
Automotive readers have rated 2005 BMW 6-Series 645Ci E63 E64 Owners Manual 4.0 out of 5.0 based on 2 product reviews. Good car. Runs well. Rim wheels problems.