Practical interior accessories
Integrated universal remote
control*
HomeLink is a registered trademark owned by
Johnson Controls, Inc.<
Programming
The concept
The integrated universal remote control
replaces up to three different hand-held trans-
mitters for various items of radio-controlled
equipment such as door openers and house
alarm systems. The integrated universal remote
control recognizes and learns the transmitted
signal of each of the original hand-held trans-
mitters.
The signal of an original hand-held transmitter
can be programmed on one of the three mem-
ory buttons 1. Once this is done, each of the
devices can be actuated with the appropriately
programmed memory button 1. The indicator
lamp 2 confirms transmission of the signal.
1
2
Memory buttons
Indicator lamp
Fixed-code hand-held transmitters
1.
2.
Turn the ignition key to position 2.
Should you sell your vehicle one day, be sure to
delete the stored programs beforehand for your
safety, refer to page 63.
For initial use:
Press both outer buttons 1 for approx.
20
seconds, maintaining pressure until the
To prevent possible damage or injury,
before programming or using the inte-
grated universal remote control, always inspect
the immediate area to make certain that no peo-
ple, animals or objects are within the travel
range of the device. Also, comply with the
safety precautions of the original hand-held
transmitter.<
indicator lamp 2 starts to flash. The three
memory buttons 1 are cleared.
3.
4.
Hold the original hand-held transmitter at a
distance of approx. 2 in/5 cm to 8 in/20 cm
from the memory buttons 1.
The required distance between the
hand-held transmitter and memory
buttons 1 depends on the relevant system
of the original hand-held transmitter used.<
Checking compatibility
Simultaneously press the transmit button
on the original hand-held transmitter and
the desired memory button 1 of the inte-
grated universal remote control. Initially, the
indicator lamp 2 flashes slowly. Release
both buttons as soon as the indicator
lamp 2 flashes rapidly. If the indicator
lamp 2 does not flash rapidly after approx.
15 seconds, change the distance.
If you see this symbol on the packaging
or in the manual supplied with the orig-
inal hand-held transmitter, it is safe to
assume that it is compatible with the integrated
universal remote control.
If you have additional questions, please
consult your BMW Sports Activity Vehicle
Center or call 1-800-355-3515.
You can also visit these websites:
www.bmwusa.com or
5.
To program other original hand-held trans-
mitters, repeat steps 3 and 4.
www.homelink.com.
62
Online Edition for Part-No. 01 41 0 158 448 - � 09/04 BMW AG
| Categories | BMW Manuals, BMW X3 Manuals |
|---|---|
| Tags | BMW E83, BMW X3 2.5i, BMW X3 3.0i |
| Model Year | 2005 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(1 votes, average: 5 out of 5)
Automotive readers have rated 2005 BMW X3 2.5i 3.0i E83 Owners Manual 5.0 out of 5.0 based on 1 product reviews. Good morning can I see the manual firt before I give a review