Low beams and high beams
1.
2.
Open the caps with a suitable object, e.g. a
coin or screwdriver
Left side of engine compartment:
Fold up the protective cover in the wheel
well.
1
2
Low beams
High beams
H7 bulb, 55 watts
Headlamp cover
The H7 bulb is pressurized. Therefore,
1.
Pull the wire clamp out straight
wear safety glasses and protective
gloves. Failure to comply with these precau-
tions could result in physical injury if the bulb is
damaged.<
1.
2.
3.
Turn the bulb holder to the left and pull out
Remove and replace the bulb
Install in the reverse order.
When cleaning the headlamps, please
observe the instructions in the Caring for
your vehicle brochure.<
2.
Pull the wire clamp past the catches, see
arrows, and fold it down
Xenon lamps*
The service life of these bulbs is very long and
the probability of a failure is very low, provided
that they are not switched on and off an unusual
number of times. If one of these bulbs should
nevertheless fail, it is possible to continue driv-
ing with great caution using the fog lamps, pro-
vided traffic laws in your area do not prohibit
this.
Because of the extremely high voltages
involved, any work on the xenon lighting
system, including bulb-changing, should be
carried out by technically qualified personnel
only. Otherwise, there is a risk of fatal injury.<
3.
Flip the headlamp cover open and remove.
Reinstall the headlamp cover carefully. If
it is not on tight, the headlamp installation
could be damaged.<
Reinstall the headlamp cover in reverse order.
92
Online Edition for Part-No. 01 41 0 158 704 - © 10/04 BMW AG
| Categories | BMW Manuals, BMW Z-Series Manuals |
|---|---|
| Tags | BMW 2.5i, BMW 3.0i, BMW E85, BMW Z4 2.5i |
| Model Year | 2005 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)