APPEARANCE CARE
5
5
F010P01P-GAT
Tire replacement
F010S01P-GAT
Tire air pressure
F010T01P-GAT
Tire storage
Tires which do not meet the size
specifications must not be used. Re-
placement of the tires must be made
as a set of the two front tires, the two
rear tires, or all four tires.
A mixture of bias-ply tires and radial
tires must not be used. Consult an
authorized HYUNDAI dealer regarding
tire replacement.
The air pressure of the tires must
always be maintained in accordance
with the specifications, and should be
measured when the tires are cool.
If any changes in driving conditions
(speed and/or load weight) occur, the
air pressure of the tires must meet the
specifications which apply to the new
driving conditions. If the vehicle is
going to be driven under varying load
weight, etc., the air pressure must be
adjusted in order to meet the highest
specifications of the conditions under
which the vehicle is driven (high speeds
and maximum load weight).
Storage of the tires should be in a
dark, well-ventilated place.
Tires not mounted on rims should be
stored vertically. Be sure that the tires
are not in contact with fuel, oil grease,
etc.
F010R01P-GAT
Tire care
For driving safely, and in order to
obtain the maximum useful life of the
tires, the following points should be
observed. For information concerning
inspection, air pressure, and rotation
of the tires, refer to the part which
deals with wheels in the section of this
manual entitled "Consumer Informa-
tion".
| Categories | Hyundai Manuals, Hyundai H-1 Grand Starex Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Grand Starex |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)