1
BEFORE DRIVING YOUR VEHICLE
18
B070F02A-GAT
Keyless Entry System
(If installed)
B070E02P-AAT
Replacing the battery
When the transmitter's battery be-
comes weak, it may take several
pushes on the button to lock or unlock
the doors, and the LED will not light.
Replace the battery as soon as pos-
sible.
Locking doors
1.
2.
3.
Close all doors.
Push the button on the transmitter.
At the same time all doors lock, the
turn signal lights will blink once to
indicate that the system is armed.
Battery type : CR1220 (Minibus/Van)
CR2032 (Truck)
Unlocking doors
HTB054
Replacement instructions:
(Minibus/Van)
3.
Remove four screws at the back
side of the built-in circuit.
1.
Push the button on the transmitter
once more after all doors were
locked.
2.
At the same time all doors unlock,
the turn signal lights will blink twice
to indicate that the system is dis-
armed.
HTB053
HTB055
1.
2.
Remove the screw with a phillips
screwdriver.
Carefully separate the case with a
flat-head screwdriver as shown in
the illustration.
4. Remove the old battery from the
case and note the polarity. Make
sure the polarity of the new battery
is the same (+side facing up), then
insert it in the transmitter.
| Categories | Hyundai Manuals, Hyundai H-1 Grand Starex Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Grand Starex |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)