In Case Of An Emergency
1
0.Remove the lug nuts by turning them
counterclockwise, then remove the wheel.
Once the lug nuts have been tightened, lower the
vehicle fully to the ground and continue to tighten the
lug nuts until they are completely secured.
11.
12.
Mount the spare tire into position and tighten the
nuts by hand. Install the lug nuts with the beveled
edge inward.
Turn the jack handle counterclockwise and lower
the vehicle until it touches the ground. Tighten the
lug nuts firmly in an “X’’ pattern.
If you are unsure of the tightness of the wheel lug nuts,
have them checked at the nearest service station. The
.
specified tightening torque is 103 N m (76 ft. lb.).
CAUTION
Your vehicle has metric threads on the wheel studs
and nuts. During wheel removal, make certain
that the same nuts removed are reinstalled - or, if
replaced, that nuts with metric threads and the
same configuration are used. Installation of a non-
metric thread nut on a metric stud or vice-versa
will not secure the wheel to the hub properly and
will damage the stud so that it must be replaced.
Be sure to use extreme care in checking for thread
style before installing aftermarket lug nuts or
wheels. If in doubt, consult an Authorized Kia
Dealer. Damaged studs may result in wheel loss
and personal injury.
1
3
4
2
1B3106002B
6-22
| Categories | Kia Manuals, Kia Rio Manuals |
|---|---|
| Model Year | 2005 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(2 votes, average: 3 out of 4)
Automotive readers have rated 2005 Kia Rio Owners Manual 3.0 out of 4.0 based on 2 product reviews. Very good.on fuel