Operation
Engine compartment
Checking the engine oil level with the
control system
ENGINE OIL LEVEL
MEASURING NOW
CORRECT MEASUREMENT
ONLY IF VEH. LEVEL
i
If you want to interrupt the checking
procedure, press the k or j
button on the multifunction steering
wheel.
When checking the oil level
ț
the vehicle must be parked on level
ground
ț
with the engine at operating tempera-
ture, the vehicle must have been sta-
tionary for at least five minutes with the
engine turned off
̈
If necessary, add engine oil.
For adding engine oil see (୴ page 291).
For more information on engine oil, see the
“Technical data” section (୴ page 429) and
One of the following messages will sub-
sequently appear in the indicator:
ț
with the engine not at operating tem-
perature yet, the vehicle must have
been stationary for at least 30 minutes
with the engine turned off
(୴ page 431).
ț ENGINE OIL LEVEL
OK
To check the engine oil level via the multi-
function display, do the following:
ț ADD 1.0 QT. TO
REACH MAX. OIL LEVEL
̈
Switch on ignition (୴ page 34).
(Canada: 1.0 LITER)
The standard display (୴ page 148) should
appear in the multifunction display.
ț ADD 1.5 QTS. TO
REACH MAX. OIL LEVEL
̈
Press button k or j on the
steering wheel until the following mes-
sage is seen in the multifunction dis-
play:
(Canada: 1.5 LITERS)
ț ADD 2.0 QTS.
TO REACH MAX. OIL LEVEL
(Canada: 2.0 LITERS)
288
| Categories | Mercedes-Benz Manuals, Mercedes-Benz S-Class Manuals |
|---|---|
| Tags | Mercedes-Benz S430, Mercedes-Benz S500, Mercedes-Benz S55 AMG, Mercedes-Benz S600 |
| Model Year | 2005 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)