Practical hints
Flat tire
Removing the wheel
Mounting the new wheel
̈ Guide the spare wheel onto the align-
ment bolt and push it on.
̈
Clean contact surfaces of wheel and
wheel hub.
̈ Insert wheel bolts and tighten them
slightly.
!
̈
Unscrew the alignment bolt, install last
wheel bolt and tighten slightly.
To avoid paint damage, place wheel flat
against hub and hold it there while in-
stalling first wheel bolt.
Warning!
G
Warning!
G
Use only genuine equipment
Mercedes-Benz wheel bolts. Other wheel
bolts may come loose.
1
Alignment bolt
Always replace wheel bolts that are dam-
aged or rusted.
̈
Unscrew upper-most wheel bolt and re-
move.
Do not tighten the wheel bolts when the ve-
hicle is raised. Otherwise the vehicle could
tip over.
Never apply oil or grease to wheel bolts.
̈
̈
Replace this wheel bolt with alignment
bolt 1 supplied in the tool kit.
Damaged wheel hub threads should be re-
paired immediately. Do not continue to drive
under these circumstances! Contact an au-
thorized Mercedes-Benz Center or call
Roadside Assistance.
Remove the remaining bolts.
!
Do not place wheel bolts in sand or dirt.
This could result in damage to the bolt
and wheel hub threads.
Incorrect wheel bolts or improperly tight-
ened wheel bolts can cause the wheel to
come off. This could cause an accident.
Make sure you are using the correct wheel
bolts.
̈
Remove the wheel.
401
| Categories | Mercedes-Benz Manuals, Mercedes-Benz S-Class Manuals |
|---|---|
| Tags | Mercedes-Benz S430, Mercedes-Benz S500, Mercedes-Benz S55 AMG, Mercedes-Benz S600 |
| Model Year | 2005 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)