2005 Toyota Sienna Reference Owners Guide

FEATURES/OPERATIONS
Distance control mode
Cruise control (if installed)
Turning system on/off   Setting a speed
Indicator lights
Distance control mode will cruise at a  set speed,
decelerate to maintain selected distance from a
slower vehicle in front of you, and  accelerate back
up to the selected speed if the  vehicle in front of
you changes lanes or speeds up.
Indicator light
To turn the system “ON” or “OFF”  Push the
button.
To set a speed Bring the vehicle  to the desired
speed. Push the lever down toward “-  SET.”
To cancel the set speed Pull the lever to “CANCEL.”
The set speed may also be cancelled  by depressing
the brake pedal.
To resume set speed after cancel Push  the lever
up toward “+ RES.” Until ignition or  cruise control
system is turned “OFF,” the last set  speed will be
stored in memory and can be resumed  once the
vehicle speed is increased to 25 mph  or more.
To select distance control mode Push the  ON-
OFF button. The “READY” and “CRUISE” indicator
lights will come on.
To set, cancel and resume a speed  Refer to
instructions 2, 3 and 4 in the  Cruise Control
section at left, and your Owner’s  Manual for
more details.
Note: Once vehicle speed is  set, pushing lever up
toward “+ RES.” will increase speed to  the
nearest 5 mph, and then in 5  mph increments.
Pushing lever down toward “- SET” will  reduce
speed in the same way.
NOTE: To raise set speed, push up  toward “+RES.” To
lower set speed, push down toward “-SET.”  Refer to
the Owner’s Manual for more details.
Dynamic laser cruise control (if installed)
LONG
MIDDLE
SHORT
Refer to the Owner’s Manual for more  details and
complete safety precautions before attempting to
use “Dynamic laser cruise control.”
Fixed speed mode
To change the vehicle-to-vehicle distance Pull
the distance switch briefly toward you; the
setting changes progressively from LONG to
MIDDLE to SHORT. Refer to the  Owner’s Manual
for more details.
Indicator
lights
To select conventional/fixed speed control Push
the ON-OFF button. Push the lever forward  and
hold until the “NORM” indicator light  appears.
To set, cancel and resume a speed  Refer to
instructions 2, 3 and 4 in the  Cruise Control
section above, and the Owner’s Manual  for more
details.
18
19
Product Specification
CategoriesToyota Manuals, Toyota Sienna Manuals
Model Year2005
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 20 pages
Document File TypePDF
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field