FEATURES/OPERATIONS
Auto lock functions-Programmable
Keyless entry
Door locks can be programmed to operate in four (4)
different modes:
Locking operation
Unlocking operation
Auto shift-locking All doors lock automatically when
the gear selector is moved out of the “P” Park
position with the ignition switch in the “ON”
position.
Auto shift-unlocking All doors are unlocked
automatically when the gear selector is moved into
the “P” Park position with the ignition in the “ON”
position.
To lock Push “
.”
To unlock driver door Push “ ” once.
To unlock all the doors Push “ ” twice.
NOTE: After unlocking, if a door is not opened within
thirty (30) seconds, all doors will relock for safety.
Auto speed-locking All doors are locked
automatically when the vehicle speed reaches 12
mph or higher.
Power sliding door operation (if installed)
Auto door-unlocking All doors are unlocked
automatically when the driver door is opened within
Right side power
Left side
sliding door
power
10
seconds after the ignition switch is turned from
sliding
door
“ON” to “ACC” or “LOCK.”
Refer to the Owner’s Manual for more information
on this feature, and how to change modes.
Tilt and telescopic steering wheel
To open
1
Push and hold “
.”
To close Push and hold “ ” again.
Power back door operation (if installed)
To change the steering wheel position Push the
lock release lever down, set the desired length and
angle, then return the lever to its locked position.
Note: Do not attempt to adjust while the vehicle
is in motion.
To open
1
Push and hold “
.”
To close Push and hold “ ” again.
Alarm operation
To activate alarm with remote Push “
.”
1
All doors must be unlocked to open. For additional programming
functions, visit your Toyota Dealer.
8
9
| Categories | Toyota Manuals, Toyota Sienna Manuals |
|---|---|
| Model Year | 2005 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)