INSTRUMENTS AND CONTROLS
2
WINDSHIELD WIPER AND WASHER SWITCH
21
C180A02P-GAT
NOTE:
B350B01A-AAT
Windshield Washer Operation
o Before operating the wipers in
cold weather, check to be sure
that the wiper blades are not fro-
zen to the windshield. Attempt-
ing to operate the wipers while
the blades are frozen to the wind-
shield could cause the motor to
burn out.
o If the wipers stop during opera-
tion because of ice or some other
obstruction on the windshield,
the wiper motor could burn out
even if the wiper switch is turned
off. If this occurs, promptly stop
the vehicle, turn off the ignition
switch, and clean the windshield
to allow proper wiper operation.
o Do not use the wipers when the
windshield is dry:doing so could
scratch the windshield and wear
the blades prematurely.
HSRFL2111
HSRFL2116
Thewindshieldwiperandwasherswitch
canbeoperatedwiththeignitionswitch
atthe"ON"or"START"position.Move
the switch to operate the windshield
wipers or spray the washer fluid.
To use the windshield washer, pull the
wiper/washer lever toward the steer-
ing wheel. When the washer lever is
operated, the wipers automatically
make two passes across the wind-
shield. The washer continues to oper-
ate until the lever is released.
Windshield wipers
1.OFF
2.INT
: The interval between wipers
can be varied from 2 to 10
seconds by turning.
: Speed operation the interval
adjuster switch.
NOTE:
o Do not operate the washer more
than15secondsatatimeorwhen
the fluid reservoir is empty.
o In icy or freezing weather, be
sure the wiper blades are not
frozen to the glass prior to oper-
ating the wipers.
3.LOW
4.HIGH
: Speed operation the interval
adjuster switch.
| Categories | Hyundai Manuals, Hyundai H-1 Grand Starex Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Grand Starex |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)