pressurized. Otherwise there is a risk of injury if
the bulb is damaged.<
1.
2.
Turn the wheel inwards.
Open the flap in the wheel well. To do so,
turn the fastener counterclockwise using a
coin, for example.
There are separate headlamp covers for low-
beam headlamps and high-beam headlamps.
Be careful when installing the covers, oth-
erwise leaks could occur and cause dam-
age to the headlamp system.<
For checking and adjusting headlamp
aim, please contact your BMW center.<
Access to the lamps
The high-beam headlamp can be accessed
from the engine compartment, whereas the
low-beam headlamp is accessed through a flap
in the wheel well.
Changing low-beam and high-beam
bulbs
1.
Remove the relevant cover for the head-
lamp.
2.
3.
Disconnect the plug from the lamp.
Push the wire bracket to the side out of the
mounting, arrow 1, and fold it down,
arrow 2.
1
2
3
Cover for high-beam headlamp
Cover for low-beam headlamp
Turn signal bulb socket
To remove the covers:
1.
Fold the respective wire bracket to the side,
see arrows.
2.
Flip open the cover and take it out of the
guide.
4.
5.
Remove the bulb.
Insert new bulb as shown in the detail of the
illustration above.
Follow the same steps in reverse order to reat-
tach the covers.
6.
7.
8.
Fold up the wire bracket and engage it.
Connect the plug.
Access through the wheel well
Reattach the cover.
Only for low-beam headlamps and turn signals:
Parking lamps, roadside parking lamps
5-watt bulb, W5W
223
Online Edition for Part no. 01 41 0 012 928 - © 08/06 BMW AG
| Categories | BMW 3-Series Manuals, BMW Manuals |
|---|---|
| Tags | BMW 323i, BMW 328i, BMW 328xi, BMW 335i, BMW E91 |
| Model Year | 2007 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(2 votes, average: 5 out of 5)
Automotive readers have rated 2007 BMW 3 Series 323i 328i 328xi 335i E91 Owners Manual 5.0 out of 5.0 based on 2 product reviews.