Heated seats*
The driver's seat and exterior mirror posi-
tions are stored for the remote control cur-
rently in use.
Call-up
Do not call up memory while you are driv-
ing, otherwise unexpected seat move-
ment could result in an accident.<
Convenience mode
1.
Unlock and open the driver's door or switch
on radio readiness, refer to page 57.
Press once for each temperature level.
Three LEDs indicate the highest temperature.
2.
Briefly press the desired memory button 1
or 2.
To switch off:
Press button longer.
The adjusting procedure is halted immediately
when you touch a seat adjustment switch or
one of the memory buttons.
If you continue driving within approx. the next
15 minutes, the seat heating is automatically
activated at the previously set temperature.
Safety feature
1.
Close the driver's door and switch the igni-
tion on or off, refer to page 57.
Seat and mirror memory*
2.
Press the desired memory button 1 or 2
and keep it pressed until the adjustment
process has been completed.
You can store and call up two different combi-
nations of driver's-seat and exterior-mirror
positions.
If the
Press the button again; the LED goes out.
button was pressed accidentally:
Settings for the backrest width and lumbar sup-
port are not stored in memory.
Call-up with the remote control
Storing
The driver's seat position last stored is stored
for the remote control currently in use.
You can select the occasion on which the seat is
reset to that position.
>
>
Call-up when the vehicle is unlocked
Call-up when the driver's door is opened.
When this Personal Profile function is
used, first make sure that the footwell
behind the driver's seat is free of obstacles.
Failure to do so could cause injury to persons or
damage to objects as a result of a rearward
movement of the seat.<
1.
2.
3.
4.
Switch on radio readiness or the ignition,
refer to page 57.
Adjust the seat and exterior mirrors to the
desired positions.
The adjusting procedure is halted immediately
when you touch a seat adjustment switch or
one of the memory buttons.
Press the
button.
The LED in the button lights up.
Press the desired memory button 1 or 2: the
LED goes out.
48
Online Edition for Part no. 01 41 0 012 928 - © 08/06 BMW AG
| Categories | BMW 3-Series Manuals, BMW Manuals |
|---|---|
| Tags | BMW 323i, BMW 328i, BMW 328xi, BMW 335i, BMW E91 |
| Model Year | 2007 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(2 votes, average: 5 out of 5)
Automotive readers have rated 2007 BMW 3 Series 323i 328i 328xi 335i E91 Owners Manual 5.0 out of 5.0 based on 2 product reviews.