2007 BMW 3-Series 328i 328xi 335i E92 E93 IDrive

>
>
"Engine oil level too high"
Only use approved BMW High Performance
Synthetic Oil.
Too much oil will harm the engine.
Have the vehicle checked without
delay.<
If BMW High Performance Synthetic Oil is not
available, you can add small quantities of other
synthetic oils in between oil changes. Only use
oils with the API SH specification or higher.
"Please observe recalculated service inter-
val for engine oil"
Do not add engine oil. You can continue
your journey. Note the newly calculated dis-
tance remaining to the next oil service, refer
to page 79. Have the system checked as
soon as possible.
Your BMW center will be glad to answer
any questions regarding BMW High Per-
formance Synthetic Oil or approved synthetic
oils.<
You can also call BMW of North America at
1-800-831-1117 or visit the website
www.bmwusa.com to obtain this information.
Adding engine oil
Viscosity ratings
Viscosity is a measure of an oil's flow rating and
is categorized in SAE classes.
Selecting the appropriate SAE class depends
on the regional climatic conditions in which you
normally drive your BMW.
Approved oils belong to the 5W-40 and
5W-30 classes.<
Do not add 1 US quart/1 liter of engine oil until a
corresponding message is shown on the Con-
trol Display.
These oils can be used for driving at all outside
temperatures.
Add oil within the next 125 miles/200 km,
otherwise the engine could be dam-
aged.<
Coolant
Keep oils, greases, etc. out of the reach of
children and comply with the relevant
warnings on the containers. Otherwise, health
hazards may result.<
Do not add coolant to the cooling system
when the engine is hot. Escaping coolant
can cause burns.<
Coolant is a mixture of water and an additive.
Not all commercially available additives are suit-
able for your BMW. Ask your BMW center for
suitable additives.
Oil change
Have oil changed only at your BMW center or at
a workshop that works according to BMW
repair procedures with correspondingly trained
personnel.
Only use suitable additives, otherwise
engine damage may result. The additives
are hazardous to your health.<
Specified engine oils
Comply with the appropriate environ-
mental protection regulations when dis-
posing of coolant additives.<
The quality of the engine oil selected has critical
significance for the operation and service life of
an engine. BMW continuously approves spe-
cific oils after confirming their suitability for use
in its vehicles with extensive testing.
226
Online Edition for Part no. 01 41 0 013 670 - © 02/07 BMW AG
Product Specification
CategoriesBMW 3-Series Manuals, BMW Manuals
Tags, , , ,
Model Year2007
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 272 pages
Document File TypePDF
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field