Replacing components
Onboard tool kit
Coupe
3.
4.
Fold the wiper blade upwards.
Remove the wiper blade in the direction of
the windshield, see arrow.
The onboard tool kit is stored in a compartment
on the right-hand side of the cargo bay.
Remove the cover.
To avoid damage, make sure that the
wiper arms are against the windshield
before you open the engine compartment.<
Convertible
Lamps and bulbs
The onboard tool kit is stored in a pouch under
the cargo bay floor panel.
Lamps and bulbs make an essential contribu-
tion to vehicle safety. They should, therefore,
be handled carefully. BMW recommends hav-
ing your BMW center perform any work that you
do not feel competent to perform yourself or
that is not described here.
Wiper blades
Never touch the glass of new bulbs with
your bare fingers, as even minute
amounts of contamination will burn into the
bulb's surface and reduce its service life. Use a
clean tissue, cloth or something similar, or hold
the bulb by its base.<
You can obtain a selection of replacement bulbs
at your BMW center.
1.
2.
Fold up the wiper arm.
Only change bulbs while they are cool to
the touch, otherwise you could suffer
burns.<
Remove the cover. To do so, press the hook
on the bottom, see arrow.
When working on electrical systems,
always begin by switching off the con-
sumer in question, otherwise short-circuits
could result. To avoid possible injury or equip-
ment damage when replacing bulbs, observe
any instructions provided by the bulb manufac-
turer.<
230
Online Edition for Part no. 01 41 0 013 670 - © 02/07 BMW AG
Product Specification
Categories | BMW 3-Series Manuals, BMW Manuals |
---|---|
Tags | BMW 328i, BMW 328xi, BMW 335i, BMW E92, BMW E93 |
Model Year | 2007 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |