select a drive position with the selector level for
a sequential transmission.
Have all vehicle occupants get out of the vehicle
and ensure that they remain outside the imme-
diate area in a safe place, such as behind a
guardrail.
Spare wheel*
1.
Pull back lock 1, fold open tensioning lock 2
completely and loosen the belt 3.
If a warning triangle* or portable hazard warning
lamp * is required, set it up on the roadside at an
appropriate distance from the rear of the vehi-
cle. Comply with all safety guidelines and regu-
lations.
Change the wheel only on a level, firm surface
which is not slippery. The vehicle or the jack
could slip to the side if you attempt to raise the
vehicle on a soft or slippery surface such as
snow, ice, tiles, etc.
Position the jack on a firm support surface.
Do not use a wooden block or similar object as a
support base for the jack, as this would prevent
it from extending to its full support height and
reduce its load-carrying capacity.
2.
3.
Remove the cover 4.
Remove the tool mount form the spare tire
and stow the belt in the net bag included if
necessary.
4.
Remove the spare wheel.
Preparing wheel change
To avoid serious or fatal injury: never lie under
the vehicle, and never start the engine while it is
supported by the jack.<
1.
2.
Observe the safety precautions above.
Prevent the vehicle from rolling:
Place the chock behind the front wheel on
the other side of the vehicle, or on inclines,
in front of this wheel. On steeply inclined
roads, always secure the vehicle against
rolling.
What you will need
To avoid rattling noises later on, note the posi-
tions of the tools before removing them, then
return them to their initial positions after com-
pleting work.
3.
Loosen the lug bolts a half turn.
Jacking up vehicle
1.
Position the vehicle jack at the jacking point
closest to the wheel so that the entire sur-
face of the jack base rests on the ground
perpendicularly beneath the jacking point.
The vehicle jack is designed for
changing wheels only. Do not attempt
to raise another vehicle model with it or to
raise any load of any kind. To do so could
cause accidents and personal injury.<
1
2
3
Chock*
Vehicle jack*
Lug wrench*
2.
Guide the jack head into the rectangular
recess of the jacking point when cranking
up, refer to illustration detail.
The tools are located in the hollow of the spare
wheel.
216
Online Edition for Part no. 01 41 0 013 310 - © 02/07 BMW AG
| Categories | BMW 5-Series Manuals, BMW Manuals |
|---|---|
| Tags | BMW E60, BMW M5 |
| Model Year | 2007 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(2 votes, average: 5 out of 5)
Automotive readers have rated 2007 BMW 5 Series M5 E60 Owners Manual 5.0 out of 5.0 based on 2 product reviews. Great site. Very helpful. Luv it
Great service. I have been looking for this manual for some time now. Thanks