2007 BMW Z4 3.0i 3.0si E85 Owners Manual

R Reverse
Shifting gears using the selector lever
Select only when the vehicle is stationary.
When you press the selector lever forwards or
backwards, the manual mode is activated and
Steptronic changes gear. The instrument clus-
ter shows M1 through M6.
N Neutral, idle
You can select this in a car wash, for example.
The vehicle can roll.
The transmission will only execute upshifts and
downshifts that will result in an appropriate
combination of vehicle speed and engine rpm.
For instance, downshifts that would result in
excessive engine speed will not be executed.
The desired gear will appear briefly in the
instrument cluster, followed by the actual gear.
D Drive, automatic position
This position is designed for driving under all
normal operating conditions. All forward gears
are selected automatically.
Under normal operating conditions, fuel con-
sumption is lowest when you are driving in posi-
tion D.
Shifting gears via the shift paddles* on
the steering wheel
The shift paddles allow you to shift gears
quickly since your hands can remain on the
steering wheel.
Kickdown
Kick-down enables you to achieve maximum
performance.
>
>
When you use the shift paddles on the
steering wheel to shift gears while in auto-
matic mode, the transmission automatically
switches to manual mode.
Press the accelerator pedal beyond the full-
throttle resistance point.
Manual operation and Sport program
M/S
If you do not use the shift paddles for a cer-
tain amount of time and do not accelerate,
the transmission automatically switches
back to automatic mode.
If the selector lever is in the M/S gear
plane, manual mode remains active.
>
>
To shift up, pull one of the shift paddles.
To shift down, press one of the shift pad-
dles.
The instrument cluster shows M1 through M6.
Move the selector lever from position D to the
left into the M/S range:
The Sport program is activated. This is indi-
cated by the display SD in the instrument clus-
ter. This position is recommended for a perfor-
mance-oriented driving style.
The Sport program is enabled automatically
when the Dynamic Driving Control system is
activated, refer to page 44.
The transmission will only execute upshifts and
downshifts that will result in an appropriate
combination of vehicle speed and engine rpm.
For instance, downshifts that would result in
excessive engine speed will not be executed.
The desired gear will appear briefly in the
instrument cluster, followed by the actual gear.
Malfunction
To use the automatic function again, move the
selector lever to the right into position D.
Red warning lamp
The transmission is overheating.
Reduce your speed immediately and
pull over at a suitable location so that
43
Online Edition for Part no. 01 41 0 013 320 - © 02/07 BMW AG
Product Specification
CategoriesBMW Manuals, BMW Z-Series Manuals
Tags, , ,
Model Year2007
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 132 pages
Document File TypePDF
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field