Add engine oil at the earliest opportunity, e.g.
when you stop to refuel.
Possible displays
The warning lamp lights up in yellow
within 30 seconds after the engine is
started: the oil level sensor is defective.
It is not possible to issue a current or accurate
measurement. Have the system checked as
soon as possible.
Checking the oil level
Your car is equipped with an electronic oil-level
monitor.
For a precise measurement and display of the
oil level, it is necessary that the engine be at
operating temperature, i.e. after uninterrupted
driving for at least approx. 6.5 miles/10 km. You
can have the oil level displayed while you are
driving, or while the vehicle is at a standstill on a
level surface and the engine is running.
You can have the oil level reading displayed in
the instrument cluster.
1
2
Oil level OK
Oil level is being checked.
This can take about 3 minutes if the car is at
a standstill on a level surface, or about
5
minutes while the car is on the move.
3
4
Oil level down to minimum:
Add 1 US quart/1 liter of engine oil as soon
as possible, refer also to Adding engine oil.
Oil level is too high.
Have the vehicle checked immedi-
ately, as excessive oil can damage the
engine.<
Press button 1. The oil level is checked and dis-
played for approx. 15 seconds.
To exit the display sooner, press button 1 again.
5
The oil level sensor is defective:
it is not possible to issue a current or accu-
rate measurement.
Do not add engine oil. You can continue
your journey. Have the system checked as
soon as possible.
93
Online Edition for Part no. 01 41 0 013 320 - © 02/07 BMW AG
| Categories | BMW Manuals, BMW Z-Series Manuals |
|---|---|
| Tags | BMW 3.0i, BMW 3.0si, BMW E85, BMW Z4 3.0i |
| Model Year | 2007 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)