1FEATURESOFYOURHYUNDAI
106
Standard Programming
5. Press and hold the just-trained
button and observe the red
1. At the garage door opener receiver
(motor-head unit) in the garage, locate
the "learn" or "smart" button. This can
usually be found where the hanging
antenna wire is attached to the motor-
head unit. Exact location and color of
the button may vary by garage door
opener brand. If there is difficulty locat-
ing the training button, reference the
device owner's manual or please visit
our Web site at www.homelink.com.
2. Firmly press and release the "learn" or
"smart"button(whichactivatesthe"train-
ing light").
HomeLink
®
To train most devices, follow these instruc-
tions:
Status Indicator LED. If the indicator
light stays on constantly, programming
is complete and your device should
activate when the HomeLink button is
®
pressed and released.
1.
For first-time programming, press and
holdthetwooutsidebuttons,HomeLink
®
Channel 1 and Channel 3 Buttons, until
the indicator light begins to flash (after
6.
To program the remaining two
buttons, follow steps 2
20
seconds). Release both buttons. Do
HomeLink
through 5.
®
not hold the buttons for longer than 30
seconds.
Positiontheendofyourhand-heldtrans-
mitter 1-3 inches (5-14 cm) away from
2.
3.
4.
Rolling Code Programming
the HomeLink
®
buttons while keeping
Rolling code devices which are "code-
protected" and manufactured after 1996
may be determined by the following:
o Reference the device owner's manual
for verification.
o The handheld transmitter appears to
programtheHomeLinkUniversalTrans-
ceiver but does not activate the device.
o Press and hold the trained HomeLink
button. The device has the rolling code
feature if the indicator light flashes rap-
idlyandthenturnssolidafter2seconds.
the indicator light in view.
Simultaneously press and hold both
the HomeLink and hand-held trans-
®
mitter button. DO NOT release the but-
tons until step 4 has been completed.
While continuing to hold the buttons the
redIndicatorStatusLEDwillflashslowly
NOTE:
Thereare30secondsinwhichtoinitiate
step3.
3.
Return to the vehicle and firmly press,
hold for two seconds and then release
and then rapidly after HomeLink suc-
®
the desired HomeLink button. Repeat
®
cessfully trains to the frequency signal
fromthehand-heldtransmitter.Release
both buttons.
the "press/hold/release" sequence a
second time to complete the program-
ming. (Some devices may require you
to repeat this sequence a third time to
complete the programming.)
To train rolling code devices, follow these
instructions:
| Categories | Hyundai Manuals, Hyundai Santa Fe Manuals |
|---|---|
| Tags | Hyundai Santa Fe 2.7, Hyundai Santa Fe 3.3 |
| Model Year | 2007 |
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Santa Fe |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(7 votes, average: 3.71 out of 5)
Automotive readers have rated 2007 Hyundai Santa Fe Owners Manual 3.7 out of 5.0 based on 7 product reviews. ok
amazing, this is a great owners pdf manual