Features of your vehicle
IMMOBILIZER SYSTEM (IF EQUIPPED)
Your vehicle is equipped with an elec- To deactivate the immobilizer
Limp home (override) procedure
tronic engine immobilizer system to
reduce the risk of unauthorized vehicle
use.
Your immobilizer system is comprised of
a small transponder in the ignition key,
and antenna coil in the key cylinder and
Immobilizer Control Unit (or Smartra
Unit).
With this system, whenever you insert
your ignition key into the ignition switch
and turn it to ON, the antenna coil in the
ignition switch receives a signal from the
system:
When you turn the ignition key to the ON
position, if the IMMO indicator goes off
after blinking 5 times, your transponder
equipped in the ignition key is out of order.
You cannot start the engine without the
lime home procedure. To start the engine,
you have to input your password by using
the ignition switch.
Insert the ignition key into the key cylin-
der and turn it to the ON position.
To activate the immobilizer sys-
tem:
Turn the ignition key to the OFF position.
The immobilizer system activates auto-
matically. Without a valid ignition key for
your vehicle, the engine will not start.
The following procedure is how to input
your password of “2345” as an example.
1.
Turn the ignition key to the ON position.
The IMMO indicator ( ) will blink 5
transponder in the ignition key and then ✽ NOTICE
times and go off indicating the begin-
ning of the limp home procedure.
sends the signal to the ECU (Engine
Control Unit).
The ECU checks the signal whether the
ignition key is valid.
If the key is determined to be valid, the
engine will start.
When starting the engine, do not use the
key with other immobilizer keys around.
Otherwise the engine may not start or
may stop soon after it starts. Keep each
key separately not to have any malfunc-
tion after you receive your new vehicle.
2.
3.
Turn the ignition key to the ACC posi-
tion.
To enter the first digit (in this example
“2”),
turn the ignition key to the ON and
ACC position twice. Perform the same
procedure for the next digits between 3
seconds and 10 seconds (for example,
for “3”, turn the ignition ON and ACC 3
times).
If the key is determined to be invalid, the
engine will not start.
✽
NOTICE
If you need additional keys or lose your
keys, consult your authorized Kia dealer.
3
9
Product Specification
Categories | Kia Manuals, Kia Sedona Manuals |
---|---|
Model Year | 2007 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |
how to remove rear seats