To switch off:
Convenience mode
Press button longer.
1.
Unlock and open the driver's door or switch
on radio readiness, refer to page 59.
If you continue driving within approx.
15
activated at the previously set temperature.
minutes, the seat heating is automatically
2.
Briefly press the desired memory button 1
or 2.
The temperature is lowered or the heating is
switched off entirely to save on battery power.
The LEDs stay lit.
The adjusting procedure is halted immediately
when you touch a seat adjustment switch or
one of the memory buttons.
Safety feature
Seat and mirror memory
1.
Close the driver's door and switch the igni-
tion on or off, refer to page 59.
You can store and call up two different combi-
nations of driver's-seat and exterior-mirror
positions.
2.
Press the desired memory button 1 or 2
and keep it pressed until the adjustment
process has been completed.
Settings for the backrest width and lumbar sup-
port are not stored in memory.
If the
button was pressed accidentally:
Press the button again; the LED goes out.
Storing
Call-up with the remote control
The driver's seat position last stored is stored
for the remote control currently in use.
You can select the occasion on which the seat is
reset to that position.
>
>
Call-up when the vehicle is unlocked.
Call-up when the driver's door is opened.
When this Personal Profile function is
used, first make sure that the footwell
behind the driver's seat is free of obstacles.
Failure to do so could cause injury to persons or
damage to objects as a result of a rearward
movement of the seat.<
1.
2.
3.
4.
Switch on radio readiness or the ignition,
refer to page 59.
Adjust the seat and exterior mirrors to the
desired positions.
Press the
button.
The adjusting procedure is halted immediately
when you touch a seat adjustment switch or
one of the memory buttons.
The LED in the button lights up.
Press the desired memory button 1 or 2: the
LED goes out.
Selecting automatic call-up
The driver's seat and exterior mirror posi-
tions are stored for the remote control cur-
rently in use.
iDrive, for operating principle refer to page 16.
1.
Press the
button.
This opens the start menu.
Call-up
2.
3.
4.
Press the controller to open the menu.
Select "Settings" and press the controller.
Do not call up memory while you are driv-
ing, otherwise unexpected seat move-
ment could result in an accident.<
Select "Vehicle / Tires" and press the con-
troller.
49
Online Edition for Part no. 01 41 0 014 962 - © 02/08 BMW AG
| Categories | BMW 3-Series Manuals, BMW Manuals |
|---|---|
| Tags | BMW E92, BMW E93, BMW M3 Manuals |
| Model Year | 2008 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)