For better control
> "Sport": both LEDs light up.
If the indicator lamp flashes:
DSC is regulating the drive and brak-
ing forces.
Each time the engine is started, the program set
for the remote control in use is active, refer to
Key-dependent settings on page 55.
If the indicator lamps are on:
DSC is deactivated.
You can also set and call up your preferred
program via MDrive, refer to page 54.
Drive-off assistant
Electronic Damper Control
EDC*
The drive-off assistant enables you to drive off
smoothly on uphill gradients. It is not necessary
to use the parking brake for this.
The concept
1.
Hold the car in place by depressing the
brake.
Whenever there is a change in any significant
parameter such as road surface quality or in an
operating condition such as steering, braking,
etc., the damping automatically adjusts to the
new conditions in fractions of a second.
2.
Release the brake and drive off without
delay.
The drive-off assistant holds the car in
place for approx. 2 seconds after the
You can select between three programs.
brake is released. Drive off without delay after
releasing the brake. Otherwise, the drive-off
assistant will no longer hold the car in place
after approx. 2 seconds and the car will start to
roll backwards.<
"Comfort" program
Select the "Comfort" program if you want com-
fort-oriented control of the shock absorbers.
"Normal" program
Flat Tire Monitor FTM*
The "Normal" program offers control that is bal-
anced between comfort and sportiness.
The concept
"Sport" program
The Flat Tire Monitor detects pressure loss in a
tire by comparing the rotating speeds of the
individual tires while moving.
Select the "Sport" program if you want consis-
tently sporty control of the shock absorbers.
In the event of pressure loss, the rolling circum-
ference changes and, thus, the rotating speed
of the affected wheel. This change is detected
and is reported as a flat tire.
Selecting a program
Functional requirement
In order to assure the reliable reporting of a flat
tire, the system must be initialized for the cor-
rect tire inflation pressure.
The system must be reinitialized each
time a tire inflation pressure has been cor-
rected or a wheel or tire has been changed.<
Press the EDC button repeatedly:
>
>
"Comfort": LED off:
"Normal": one LED lights up.
90
Online Edition for Part no. 01 41 0 014 962 - © 02/08 BMW AG
| Categories | BMW 3-Series Manuals, BMW Manuals |
|---|---|
| Tags | BMW E92, BMW E93, BMW M3 Manuals |
| Model Year | 2008 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)