2.
Guide the jack head into the rectangular
recess of the jacking point when cranking
up the jack, refer to section of illustration.
3.
Check and correct the tire inflation pressure
at the earliest opportunity.
Use valve stem seal caps to protect
valve stems from dirt and contamina-
tion. Dirt in valve stems is a frequent source
of gradual air loss.<
4.
5.
Reinitialize the Flat Tire Monitor, refer to
page 90, or reset the Tire Pressure Monitor,
refer to page 92.
Replace the damaged tire as soon as possi-
ble and have the new wheel/tire balanced.
Driving with spare tire
3.
Jack the vehicle up until the wheel you are
changing is raised from the ground.
On certain wheel-tire combinations, the
size of the spare tire differs from that of
the rest of the tires. The spare tire is fully capa-
ble of running in all load and speed ranges.
However, to recreate the original conditions,
the tire should be replaced as soon as possi-
ble.<
Mounting a wheel
1.
Unscrew the lug bolts and remove the
wheel.
2.
Remove accumulations of mud or dirt from
the mounting surfaces of the wheel and
hub. Clean the lug bolts.
3.
Position the new wheel or spare tire on the
hub and screw in at least two bolts diago-
nally.
When you mount wheels other than Genu-
ine BMW light-alloy wheels, different lug
bolts may also be required.
Vehicle battery
Maintenance
The battery is 100% maintenance-free, i.e., the
electrolyte will last for the life of the battery
when the vehicle is operated in a temperate cli-
mate. Your BMW center will be happy to advise
you on all questions concerning the battery.
4.
5.
Screw in the remaining lug bolts. Tighten all
the bolts securely in a diagonal pattern.
Lower the vehicle and remove the jack from
beneath the vehicle.
Charging battery
Charge the battery in the vehicle only via the
terminals in the engine compartment and with
the engine off. Connections, refer to Jump
starting on page 220.
After mounting
1.
Tighten the lug bolts in a diagonal pattern.
To ensure safety, always have the
lug bolts checked with a calibrated
torque wrench as soon as possible to
ensure that they are tightened to the speci-
fied torque. The tightening torque is
100
lb ft/140 Nm.<
2.
Reverse the removal sequence when stor-
ing the wheel and tools in the vehicle.
217
Online Edition for Part no. 01 41 0 013 316 - © 02/07 BMW AG
| Categories | BMW 7-Series Manuals, BMW Manuals |
|---|---|
| Tags | BMW 750i, BMW 750Li, BMW 760Li, BMW E65, BMW E66 |
| Model Year | 2008 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(4 votes, average: 4.25 out of 5)
Automotive readers have rated 2008 BMW 7-Series 750i 750Li 760Li E65 E66 Owners Manual 4.3 out of 5.0 based on 4 product reviews. really need this manual since my car did not come with one.
It's OK I need it, but also I'm looking for WIS to service and
repair,right now, I have transmission problem electronic part
and rebuild it, So this want I'm looking for.
Thanks, this also will help me to
Ivan
This manual has been invaluable! My BMW did not have any manuals and I didn't have a clue on how to utilize the various features. I am learning more by the day and convinced without this manual I would not have enjoyed all the luxuries this beautiful machine has to offer.