What you will need
feel a significant increase in the force of the
resistance.
To prevent possible damage to the
rear brakes, always make sure that
the parking brake is completely released
before driving the vehicle.<
5.
6.
Return the tools to their places.
Return the spare tire cover and the floor mat
to their original locations.
Have a malfunction corrected only by a
BMW center or a repair shop that works in
1
2
3
Screwdriver handle
Unlocking tool
accordance with BMW guidelines and uses
appropriately trained personnel. Only techni-
cians can return the parking brake to normal
operational status after it has been released
manually in response to a malfunction.<
10 mm open-end wrench
You will find the required tools in the onboard
tool kit mounted on the inside of the luggage
compartment lid, refer to page 213.
Following manual release, the actual sta-
tus of the parking brake may deviate from
that displayed by the indicator lamp.<
Insert the release tool into the screwdriver han-
dle as shown in the illustration.
Releasing
Reinitializing after a power supply
interruption
The parking brake can only be used again
if it was manually released due to an inter-
ruption in the supply of electrical power. Other-
wise, the function of the parking brake is not
guaranteed and there is a danger of the vehicle
rolling despite the parking brake being
engaged.<
Once the electrical power supply has been
restored, you can again use the parking brake:
1.
2.
Remove the floor mat and the cover above
the spare tire.
With the ignition on and the vehicle
stationary, briefly press the button
three times at intervals of approx.
5 seconds. This executes the fol-
lowing initialization sequence:
With the attached screwdriver handle,
insert the release tool into the opening,
arrow 1.
3.
Fit the open-end wrench onto the hexago-
nal section of the release tool.
>
>
Initializing the disengaged setting.
Insert the release tool counter to the spring
force until the stop is reached, press and
rotate in the arrow direction 2 until it notice-
ably engages and meets a perceptible
resistance.
Engaging: the system registers the new
status and the brake setting is initialized.
The indicator lamp
up green.
on Info Display lights
>
Releasing: the parking brake is ready for
operation.
4.
Without releasing, continue to turn counter
to the mechanical resistance of the drive
unit in the arrow direction 2 until you can
The indicator lamp
goes out.
on the Info Display
61
Online Edition for Part no. 01 41 0 013 316 - © 02/07 BMW AG
| Categories | BMW 7-Series Manuals, BMW Manuals |
|---|---|
| Tags | BMW 750i, BMW 750Li, BMW 760Li, BMW E65, BMW E66 |
| Model Year | 2008 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(4 votes, average: 4.25 out of 5)
Automotive readers have rated 2008 BMW 7-Series 750i 750Li 760Li E65 E66 Owners Manual 4.3 out of 5.0 based on 4 product reviews. really need this manual since my car did not come with one.
It's OK I need it, but also I'm looking for WIS to service and
repair,right now, I have transmission problem electronic part
and rebuild it, So this want I'm looking for.
Thanks, this also will help me to
Ivan
This manual has been invaluable! My BMW did not have any manuals and I didn't have a clue on how to utilize the various features. I am learning more by the day and convinced without this manual I would not have enjoyed all the luxuries this beautiful machine has to offer.