Indicator lamp displays
This prevents unintentional alarms, e.g. in the
following situations:
>
>
In stacking garages
When transporting on car-carrying trains,
by sea or on a trailer
>
When animals are to remain in the vehicle
Switching off tilt alarm sensor and
interior motion sensor
Press the
again as soon as the vehicle is locked.
button on the remote control
>
>
The indicator lamp under the interior rear-
view mirror flashes continuously: the sys-
tem is armed.
The indicator lamp lights up briefly and then
flashes continuously. The tilt alarm sensor and
the interior motion sensor are switched off until
the next time the vehicle is unlocked and subse-
quently locked again.
The indicator lamp flashes after locking: the
doors, hood or liftgate are not properly
closed. Even if you do not close the alerted
area, the system begins to monitor the
remaining areas, and the indicator lamp
flashes continuously after approx. 10 sec-
onds. However, the interior motion sensor
is not activated.
Comfort access*
Comfort access enables you to access your
vehicle without having to hold the remote con-
trol in your hand. It is sufficient to carry the
remote control with you, e.g. in your jacket
pocket. The vehicle automatically detects the
related remote control in the immediate vicinity
or in the interior.
>
>
The indicator lamp goes out after unlocking:
your vehicle has not been disturbed while
you were away.
The indicator lamp flashes after unlocking
until the remote control is inserted into the
ignition lock, however for a maximum of
approx. 5 minutes: your vehicle has been
disturbed while you were away.
Comfort access supports the following func-
tions:
>
>
>
>
Unlocking/locking vehicle
Comfort closing
Tilt alarm sensor
The tilt of the vehicle is monitored. The alarm
system reacts, e.g. in case of an attempted
wheel theft or towing.
Opening liftgate
Starting engine
Functional requirements
Interior motion sensor
>
The vehicle can only be unlocked if the
vehicle detects that the remote control car-
ried is not located in the vehicle interior.
In order for the interior motion sensor to func-
tion properly, the windows and glass sunroof*
must be completely closed.
>
>
The next unlocking and locking cycle is not
possible until after approx. 2 seconds.
Avoiding unintentional alarms
The engine can only be started if the vehicle
detects that the remote control is located in
the vehicle.
The tilt alarm sensor and interior motion sensor
may be switched off at the same time.
36
Online Edition for Part no. 01 41 0 015 021 - © 11/07 BMW AG
| Categories | BMW Manuals, BMW X6 Manuals |
|---|---|
| Tags | BMW E71, BMW X6 35i, BMW X6 35i xDrive, BMW X6 xDrive |
| Model Year | 2008 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(1 votes, average: 1 out of 1)
Automotive readers have rated 2008 BMW X6 35i XDrive E71 Owners Manual 1.0 out of 1.0 based on 1 product reviews. Thanks for your support ehere youn put this informatio