Function requirements
4.
5.
Select "Vehicle / Tires" and press the con-
troller.
In order to assure the reliable reporting of a flat
tire, the system must be initialized for the cor-
rect tire inflation pressure.
Change to upper field if necessary. Turn the
controller until "FTM" is selected and press
the controller.
The initialization must be repeated after
each time the tire inflation pressure is cor-
rected and after every tire or wheel change.<
System limits
The Flat Tire Monitor cannot indicate
sudden severe tire damage caused by
outside factors and does not detect a natural,
even pressure drop in all four tires.<
In the following situations, the system could be
delayed or malfunction:
6.
7.
8.
Start the engine, but do not start driving.
Select "Reset" and press the controller.
>
>
>
System has not been initialized
Driving on snowy or slippery road surface
Select "Yes" and press the controller. The
message "resetting FTM …" is displayed.
Sporty driving style: slip in the drive wheels,
high lateral acceleration
>
Driving with snow chains*
When you are driving with the compact wheel*
the Flat Tire Monitor is unable to function.
Initializing system
The initialization finishes during driving,
which can be interrupted at any time.
When driving resumes, the initialization is con-
tinued automatically. Do not initialize the sys-
tem when driving with snow chains* or with the
compact wheel*.<
9.
Start to drive.
The initialization finishes during driving.
iDrive, for operating principle refer to page 16.
Indication of a flat tire
1.
Press the
This opens the start menu.
button.
The warning lamp lights up red. A
message appears on the Control Dis-
play. In addition, an acoustic signal
sounds. There is a flat tire or extensive inflation
pressure loss.
2.
3.
Press the controller to open the menu.
Select "Settings" and press the controller.
If you have deactivated DSC, it will be activated
automatically.
1.
Cautiously reduce speed to below 50 mph/
80
km/h. Avoid sudden braking and steer-
ing maneuvers. Do not exceed a speed of
50
mph/80 km/h.
In case of further air loss of the defective
wheel, its position will be indicated to you
on the Control Display.
90
Online Edition for Part no. 01 41 0 015 021 - © 11/07 BMW AG
| Categories | BMW Manuals, BMW X6 Manuals |
|---|---|
| Tags | BMW E71, BMW X6 35i, BMW X6 35i xDrive, BMW X6 xDrive |
| Model Year | 2008 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(1 votes, average: 1 out of 1)
Automotive readers have rated 2008 BMW X6 35i XDrive E71 Owners Manual 1.0 out of 1.0 based on 1 product reviews. Thanks for your support ehere youn put this informatio