Maintenance
G200700BUN
G200800AUN
1
Wheel replacement
Tire traction
5,6
7
When replacing the metal wheels for Tire traction can be reduced if you
any reason, make sure the new drive on worn tires, tires that are
wheels are equivalent to the original improperly inflated or on slippery
factory units in diameter, rim width road surfaces. Tires should be
4
and offset.
replaced when tread wear indicators
appear. To reduce the possibility of
losing control, slow down whenever
there is rain, snow or ice on the road.
2
3
WARNING
A wheel that is not the correct
size may adversely affect wheel
and bearing life, braking and
1
I030B04JM
G200900AUN
G201000AUN
Tire maintenance
stopping
abilities,
handling
Tire sidewall labeling
characteristics, ground clear-
ance, body-to-tire clearance,
In addition to proper inflation, correct
wheel alignment helps to decrease
tire wear. If you find a tire is worn
unevenly, have your dealer check the
wheel alignment.
This
information
identifies
and
describes the fundamental charac-
teristics of the tire and also provides
the tire identification number (TIN)
for safety standard certification. The
TIN can be used to identify the tire in
case of a recall.
snow
chain
clearance,
speedometer and odometer cal-
ibration, headlight aim and
bumper height.
When you have new tires installed,
make sure they are balanced. This
will increase vehicle ride comfort and
tire life. Additionally, a tire should
always be rebalanced if it is removed
from the wheel.
G201001AUN
1. Manufacturer or brand name
Manufacturer or Brand name is
shown.
7
41
| Categories | Hyundai Manuals, Hyundai H-1 Grand Starex Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Grand Starex |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)