Maintenance
G200700BUN-UK
G200800AUN-UK
1
Wheel replacement
Tyre traction
5,6
7
When replacing the metal wheels for Tyre traction can be reduced if you
any reason, make sure the new drive on worn tyres, tyres that are
wheels are equivalent to the original improperly inflated or on slippery
factory units in diameter, rim width road surfaces. Tyres should be
4
and offset.
replaced when tread wear indicators
appear. To reduce the possibility of
losing control, slow down whenever
there is rain, snow or ice on the road.
2
3
WARNING
A wheel that is not the correct
size may adversely affect wheel
and bearing life, braking and
1
I030B04JM
G200900AUN-UK
G201000AUN-UK
Tyre maintenance
stopping
abilities,
handling
Tyre sidewall labeling
characteristics, ground clear-
ance, body-to-tyre clearance,
In addition to proper inflation, correct
wheel alignment helps to decrease
tyre wear. If you find a tyre is worn
unevenly, have your repairer check
the wheel alignment.
This
information
identifies
and
describes the fundamental charac-
teristics of the tyre and also provides
the tyre identification number (TIN)
for safety standard certification. The
TIN can be used to identify the tyre in
case of a recall.
snow
chain
clearance,
speedometer and odometer cal-
ibration, headlight aim and
bumper height.
When you have new tyres installed,
make sure they are balanced. This
will increase vehicle ride comfort and
tyre life. Additionally, a tyre should
always be rebalanced if it is removed
from the wheel.
G201001AUN
1. Manufacturer or brand name
Manufacturer or Brand name is
shown.
7
35
| Categories | Hyundai Manuals, Hyundai H-1 Grand Starex Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Grand Starex |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)