WHATTODOINANEMERGENCY3
15
ameterendsdirectedinward.Jigglethe
tire to be sure it is completely seated,
then tighten the nuts as much as pos-
sible with your fingers again.
on the wrench handle or use an exten-
sion pipe over the wrench handle.
D060J01FC-GAT
AfterChangingWheels
Go around the wheel tightening every
other nut until they are all tight. Then
double-check each nut for tightness.
After changing wheels, have a techni-
cian tighten the wheel nuts to their
proper torque as soon as possible.
D060I01E-AAT
8.
Lower Vehicle and Tighten Nuts
Wheelnuttighteningtorque:
Steel wheel & aluminium alloy wheel:
65-80
lb.ft(900-1,100kg.cm)
OGK036605
If you have a tire gauge, remove the
valvecapandchecktheairpressure.If
the pressure is lower than recom-
mended, drive slowly to the nearest
servicestationandinflatetothecorrect
pressure. If it is too high, adjust it until
it is correct. Always reinstall the valve
cap after checking or adjusting tire
pressure. If the cap is not replaced, air
may leak from the tire. If you lose a
valve cap, buy another and install it as
soon as possible.
HGK4014
Lower the car to the ground by turning
the wheel nut wrench counterclock-
wise.Thenpositionthewrenchasshown
in the drawing and tighten the wheel
nuts. Be sure the socket is seated
completely over the nut. Do not stand
Categories | Hyundai Manuals, Hyundai Tiburon Manuals |
---|---|
Tags | Hyundai Tiburon 2.0, Hyundai Tiburon 2.7 |
Model Year | 2008 |
Download File |
|
Document Type | Owners Manual |
Language | English |
Product Brand | Hyundai, Tiburon |
Document File Type | |
Copyright | Attribution Non-commercial |
(2 votes, average: 3 out of 4) Automotive readers have rated 2008 Hyundai Tiburon Owners Manual 3.0 out of 4.0 based on 2 product reviews.
Car purchased no owners manual included.
I just bought this car and it doesnt have a manual with it.