DO-IT-YOURSELFMAINTENANCE 6
13
G110D01GK-AAT
Checking the automatic transaxle fluid
level
!
WARNING:
The cooling fan is controlled by engine
coolant temperature and may sometimes
operate even when the engine is not run-
ning. Use extreme caution when working
near the blades of the cooling fan, so that
you are not injured by a rotating fan blade.
As the engine coolant temperature de-
creases, the fan will automatically shut off.
This is a normal condition.
Fluid level should be within this range
2.0L
2.7L
HGK5008
3.
4.
Confirm if the fluid level is in the “HOT” range
on the level gauge. If the fluid level is lower,
add the specified fluid from the fill hole. If the
fluid level is higher, drain the fluid from the
drain hole.
HGK5007
The automatic transaxle fluid level should be
checked regularly.
If the fluid level is checked in cold
condition[fluid
temperature 20~30°C
Keep the vehicle on level ground with the park-
ing brake applied and check the fluid level
according to the following procedure.
(68~86°F)],
add the fluid to the “COLD” line
and then recheck the fluid level according to
the above step 2.
1.
Place the shift lever in N(neutral) position
and confirm the engine is running at idle
speed.
2.
After the transaxle is warmed up sufficiently
[fluid temperature 70~80°C (158~176°F)],
for example by 10 minutes usual driving,
movetheshiftleverthroughallpositionsthen
place the shift lever in N(neutral) or P(park)
position.
Categories | Hyundai Manuals, Hyundai Tiburon Manuals |
---|---|
Tags | Hyundai Tiburon 2.0, Hyundai Tiburon 2.7 |
Model Year | 2008 |
Download File |
|
Document Type | Owners Manual |
Language | English |
Product Brand | Hyundai, Tiburon |
Document File Type | |
Copyright | Attribution Non-commercial |
(2 votes, average: 3 out of 4) Automotive readers have rated 2008 Hyundai Tiburon Owners Manual 3.0 out of 4.0 based on 2 product reviews.
Car purchased no owners manual included.
I just bought this car and it doesnt have a manual with it.