In case of an emergency
Connecting jumper cables
Jump starting procedure
1.
Make sure the booster battery is
12-volt and that its negative termi-
nal is grounded.
Connect cables in numerical order and disconnect in reverse order.
1
2
3
4
5
6
7
8
9
2.
If the booster battery is in another
vehicle, do not allow the vehicles
to touch.
Jumper Cables
3.
4.
Turn off all unnecessary electrical
loads.
Connect the jumper cables in the
exact sequence shown in the previ-
ous illustration. First connect one
end of a jumper cable to the posi-
tive terminal of the discharged bat-
tery (1), then connect the other end
to the positive terminal on the
booster battery (2). Proceed to con-
nect one end of the other jumper
cable to the negative terminal of the
booster battery (3), then the other
end to a solid, stationary, metallic
point (for example, the engine lifting
bracket) away from the battery (4).
Do not connect it to or near any
part that moves when the engine is
cranked.Do not connect the jumper
cable from the negative terminal of
the booster battery to the negative
terminal of the discharged battery.
Discharged battery
Booster battery
OLD046001
6
10
| Categories | Kia Manuals, Kia Spectra Manuals |
|---|---|
| Model Year | 2008 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(1 votes, average: 2 out of 2)
Automotive readers have rated 2008 Kia Spectra Owners Manual 2.0 out of 2.0 based on 1 product reviews. I haven't seen it yo rate iy