Practical hints
What to do if …
Lamps in instrument cluster
General information:
If any of the following lamps in the instru-
ment cluster fails to come on during the
bulb self-check when switching on the igni-
tion, have the respective bulb checked and
replaced if necessary.
Problem
Possible cause/consequence
Suggested solution
-
The yellow ABS indicator lamp The ABS has detected a malfunction and has ̈ Continue driving with added caution.
comes on while the engine is switched off. The BAS, EBP, ESP
running.
®
and
Wheels may lock during hard braking,
reducing steering capability.
PRE-SAFE are also switched off (see messages
®
in multifunction display).
̈
̈
Read and observe messages in the
multifunction display (୴ page 358).
The brake system is still functioning normally
but without the ABS available.
Have the system checked at an autho-
rized Mercedes-Benz Center as soon
as possible.
If the ABS control unit is malfunctioning, other
systems such as the Parktronic system*, Dis-
tronic*, navigation system*, or the automatic
transmission may also be malfunctioning.
Failure to follow these instructions in-
creases the risk of an accident.
The charging voltage has fallen below 10 volts. When the voltage is above this value
The ABS has switched off.
again, the ABS is operational again and
the ABS indicator lamp should go out.
The battery may not be sufficiently charged.
If the ABS indicator lamp does not go out:
̈
Have the generator (alternator) and
battery checked.
344
Product Specification
Categories | Mercedes-Benz CLS-Class Manuals, Mercedes-Benz Manuals |
---|---|
Tags | Mercedes-Benz CLS550, Mercedes-Benz CLS63 AMG, Mercedes-Benz W219 |
Model Year | 2008 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |
This is exactly what I've been looking for and need. Great info in perfect detail and limited pics help as well.
Great having the manual saved on my tablet versus having to get the hard copy from within the vehicle. It's very thorough and complete, much appreciated
. Ty