Do not exceed a speed of 35 mph/
Reinitialize the Flat Tire Monitor, refer to
page 84 for more information.
60
km/h. If possible, do not fall below a
speed of 12 mph/20 km/h.<
Have the faulty tire and the sealant bottle of the
M Mobility System replaced as soon as possi-
ble.<
Producing the tire inflation pressure
1.
2.
3.
After driving approx. 2 miles/3 km, stop at a
suitable location.
Changing wheels
Connect connection hose 9 of the com-
pressor directly to the tire valve.
The tools for changing wheels are avail-
able as optional accessories from your
BMW center.<
Insert connector 3 into the cigarette lighter
socket/power socket in the interior of the
vehicle.
Jack mounting points
4.
Adjust the tire inflation pressure to 29 psi/
200
kPa. With the ignition switched on, pro-
ceed as follows:
>
To increase the inflation pressure:
Switch on the compressor, position I. To
check the current inflation pressure set-
ting, briefly switch off the compressor.
Do not let the compressor run for
more than 10 minutes, otherwise the
device will overheat and may be dam-
aged.<
The jacking points are at the positions shown in
the illustration.
>
To reduce the inflation pressure: turn
screw 8 on the pressure gauge.
If the inflation pressure is not maintained,
drive the vehicle a second time, refer to
Vehicle battery
Distributing the sealant. Then repeat steps 1 to
4.
Use of the M Mobility System may be ineffec-
tual for tire damage larger than approx. 0.16 in/
Battery care
The battery is 100% maintenance-free, the
electrolyte will last for the life of the battery
when the vehicle is operated in a temperate cli-
mate. Your BMW center will be glad to advise in
all matters concerning the battery.
4
mm. Please contact the nearest BMW center,
refer to page 221, or a workshop that works
according to BMW repair procedures with cor-
respondingly trained personnel if the tire can-
not be made roadworthy with the M Mobility
System.<
Charging the battery
Only charge the battery in the vehicle via the
terminals in the engine compartment with the
engine off. Connections, refer to Jump starting
on page 222.
The tire inflation pressure must be at least
29
psi/200 kPa. If it is not, do not continue
driving.<
Disposal
Continuing your trip
Have old batteries disposed of by your
BMW center or hand them in to a recy-
cling center. Maintain the battery in an upright
position for transport and storage. Always
Do not exceed the maximum allowable
speed of 50 mph/80 km/h to avoid the risk
of an accident.<
219
Online Edition for Part no. 01 41 2 600 999 - © 08/08 BMW AG
| Categories | BMW 3-Series Manuals, BMW Manuals |
|---|---|
| Tags | BMW E92, BMW E93, BMW M3 Manuals |
| Model Year | 2009 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(1 votes, average: 4 out of 4)
Automotive readers have rated 2009 BMW 3-Series M3 E92 E93 Owners Manual 4.0 out of 4.0 based on 1 product reviews. it was very help full lengthy process but atlist got what i wanted