Radio readiness and ignition off
The starter operates automatically for a certain
time, and stops automatically as soon as the
engine has started.
All indicator and warning lamps as well as dis-
plays in the instrument cluster go out.
To stop the starting procedure: press the start/
stop button again.
Starting the engine
M dual clutch transmission with
Drivelogic
Do not run the engine in closed rooms,
otherwise the inhalation of toxic exhaust
gases can cause unconsciousness and death.
The exhaust gases contain carbon monoxide,
an odorless and colorless, but highly toxic gas.
Never leave an unattended vehicle with the
engine running, otherwise such a vehicle repre-
sents a potential safety hazard.
Before leaving the car with the engine running,
place the transmission in neutral and forcefully
apply the parking brake to prevent the car from
moving.<
Remote control in the ignition lock or, with con-
venient access, inside the vehicle, refer to
page 34.
1.
2.
Depress the brake.
Press the start/stop button.
The engine starts with the selector level in any
position. Driving off: with the engine running,
move the selector level from the middle position
Β in the desired direction.
Every time you start the engine, sequential
mode is activated in program S3 if you lightly
press the selector lever to the right to position
D/S with the brake pedal depressed.
Avoid frequent starting in quick succes-
sion as well as repeated start attempts in
which the engine does not start. Otherwise, the
fuel is not burned or incompletely burned and
there is a danger of overheating and damaging
the catalytic converter.<
Switching off the engine
Do not wait for the engine to warm up while the
vehicle remains stationary. Start driving right
away, but at moderate engine speeds.
Always take the remote control with you
when you leave the vehicle.
When parking, forcefully apply the parking
brake to prevent the vehicle from moving.<
Manual transmission
1.
With the car at a standstill, press the start/
stop button.
2.
3.
4.
Shift into first gear or reverse.
Forcefully apply the parking brake.
Removing the remote control from the igni-
tion lock, refer to page 55.
Manual transmission
Remote control in the ignition lock or, with con-
venient access, inside the vehicle, refer to
page 34.
M dual clutch transmission with
Drivelogic
1.
Press the start/stop button.
If N is engaged when you switch off the
engine, you are notified visually and acous-
tically.
1.
2.
3.
Depress the brake.
Depress the clutch and shift to neutral.
Press the start/stop button.
2.
Forcefully apply the parking brake.
56
Online Edition for Part no. 01 41 2 600 999 - © 08/08 BMW AG
| Categories | BMW 3-Series Manuals, BMW Manuals |
|---|---|
| Tags | BMW E92, BMW E93, BMW M3 Manuals |
| Model Year | 2009 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(1 votes, average: 4 out of 4)
Automotive readers have rated 2009 BMW 3-Series M3 E92 E93 Owners Manual 4.0 out of 4.0 based on 1 product reviews. it was very help full lengthy process but atlist got what i wanted