Seat, mirror and steering
wheel memory
the steering wheel adjustment in any direction,
refer to page 56.
Safety feature
1.
Close the driver's door and switch ignition
on or off, refer to page 60.
2.
Press the desired memory button 1, 2 or 3
and maintain pressure until the adjustment
process has been completed.
If the
button was pressed inadvertently:
press the button again; the LED goes out.
You can store and select three different adjust-
ment settings for the driver's seat, exterior mir-
rors and steering wheel.
Requesting with remote control
The last positions of the driver's seat, external
rearview mirrors, and steering wheel are stored
for the remote key currently in use.
The adjustment of the lumbar support is not
stored in the memory.
You can select* when the position is requested.
>
>
Request when unlocking vehicle
Storing
Request when opening driver's door. In the
Convertible, only this function is used.
1.
2.
3.
4.
Switch on radio readiness or ignition, refer
to page 60.
When using this feature, always make
sure that the footwell behind the driver's
Set the desired seat, exterior mirror and
steering wheel positions.
seat is empty and unobstructed. Failure to do
so could cause injury to persons or damage to
objects behind the seat as a result of a rearward
movement of the seat.<
Press the
The LED in the button lights up.
button:
Press the desired memory button 1, 2 or 3:
The LED goes out.
The system cancels the adjustment procedure
when you briefly press one of the seat adjust-
ment switches or one of the memory buttons.
Requesting
Do not request a position from the mem-
iDrive, for operating principle refer to page 16.
ory while the vehicle is moving. There is a
risk of accident from unexpected movement of
the seat or steering wheel.<
1.
2.
3.
4.
Open the start menu.
Press the controller to open the menu.
Select "Settings" and press the controller.
Comfort mode
Select "Vehicle / Tires" and press the con-
troller.
1.
Open the driver's door after unlocking or
switch on radio readiness, refer to page 60.
2.
Briefly press the desired memory button 1,
2 or 3.
The system cancels the adjustment procedure
when you briefly press one of the seat adjust-
ment switches or one of the memory buttons.
The adjusting procedure for the steering wheel
is interrupted if you briefly press the switch for
51
Online Edition for Part no. 01 41 2 600 759 - © 08/08 BMW AG
| Categories | BMW 6-Series Manuals, BMW Manuals |
|---|---|
| Tags | BMW 650i, BMW E63, BMW E64 |
| Model Year | 2009 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)