Displaying the urgency of malfunctions
second time if your vehicle speed falls below it
again by at least 3 mph/5 km/h.
Displaying, setting or changing limit
iDrive, for operating principle refer to page 16.
1.
2.
Open the start menu.
Open "Navigation".
Without navigation system*: Open "Car
Data".
3.
4.
Select "Car Data" and press the controller.
Select "Limit" and press the controller.
Depending on the equipment, the stored Check
Control messages are also displayed with the
following symbols:
No malfunctions detected in the moni-
tored systems.
Malfunctions are present in the moni-
tored systems. Depending on the mal-
function, supplementary information is
shown on the Control Display.
The symbols also indicate the status of the ser-
vice requirements display, refer to page 79.
5.
Select the speed value and press the con-
troller.
Displays after completion of trip
6.
7.
Turn the controller to set the limit.
Malfunction reports generated during the trip
are shown consecutively when you switch off
the ignition.
Press the controller to apply the setting.
The limit is activated.
Before the display disappears, you can display
the messages once again. Press the CHECK
button for approx. 2 seconds. If several mes-
sages are present, you can continue to press
the CHECK button to view them in succession.
Applying your current speed as limit
Select "Select current speed" and press the
controller. The system adopts your current
speed as the limit.
The display goes out:
Activating/deactivating limit
>
>
after a short time
Select "On" and press the controller.
The limit is activated.
when you press the CHECK button again
for approx. 2 seconds
Stopwatch
Speed limit
iDrive, for operating principle refer to page 16.
You can enter a speed and a Check Control
message indicates when you have reached this
speed. This enables you, for example, to
receive warnings if you exceed a speed limit in
an urban area.
1.
2.
Open the start menu.
Open "Navigation".
Without navigation system*: Open "Car
Data".
You are only warned of reaching this speed a
3.
Select "Car Data" and press the controller.
83
Online Edition for Part no. 01 41 2 600 759 - © 08/08 BMW AG
| Categories | BMW 6-Series Manuals, BMW Manuals |
|---|---|
| Tags | BMW 650i, BMW E63, BMW E64 |
| Model Year | 2009 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)