Safety features of your vehicle
If the driver's seat belt is not fastened
when the ignition switch is turned on, the
seat belt warning light and the seat belt
warning chime will operate for approxi-
mately 6 seconds. But if it is fastened
within the 6 seconds, the warning light
will blink till the 6 seconds and the warn-
ing chime will turn off immediately.
If the driver's seat belt is disconnected
after the ignition switch is turned to the
ON position, the seat belt warning light
will blink for approximately 6 seconds.
But if it is fastened within the 6 seconds,
the warning light will turn off immediately.
If the driver's seat belt is not fastened
when the vehicle speed exceeds 10 km/h
1GQA2083
B180A01NF-1
C020101AHM-EU
Seat belt warning
C020102BHM-EU
Seat belt - Driver's 3-point system
with emergency locking retractor
As a reminder to the driver, the seat belt
warning light will blink for approximately
seconds each time you turn the ignition
(6
chime will operate for approximately 11
times with a pattern of 6 seconds on and
mph), the seat belt warning light and
To fasten your seat belt:
6
To fasten your seat belt, pull it out of the
retractor and insert the metal tab (1) into
the buckle (2). There will be an audible
"click" when the tab locks into the buckle.
switch ON regardless of belt fastening.
24
seconds off until the belt is fastened
or the vehicle speed decreases below 5
km/h (3 mph).
The seat belt automatically adjusts to the
proper length only after the lap belt por-
tion is adjusted manually so that it fits
snugly around your hips. If you lean for-
ward in a slow, easy motion, the belt will
extend and let you move around. If there
is a sudden stop or impact, however, the
belt will lock into position. It will also lock
if you try to lean forward too quickly.
3
18
Product Specification
Categories | Kia Borrego Manuals, Kia Manuals |
---|---|
Model Year | 2009 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |
I want to buy used 2009 Kia Borrego. So I need mannual