FEATURES/OPERATIONS
Auto lock functions
Lights & turn signals
Automatic door locks can be programmed to operate in four different
modes, or turned OFF.
Headlights
-
-
-
Doors lock when shifting from Park.
Doors lock when the vehicle speed goes above approximately 12 mph.
Doors unlock when the engine key is turned to the “ACC” or “LOCK”
AUTO*
High beam
Headlights
position and driver’s door is opened.
Parking lights
Low beam
-Doors unlock when shifting into Park.
Automatic Transmission
High beam flasher
*
If equipped
-Daytime Running Light system (if equipped) Automatically turns on the
headlights at a reduced intensity.
-Automatic light cut off system Automatically turns lights off after 30
seconds when any of the doors are opened and closed with the engine
off. Lights may also be turned off by pushing lock button on remote once
more after locking.
P
R
N
D
4
3
2
Park*
Reverse
Neutral
Drive
Fourth gear
Third gear
Second gear
Turn signals
Right turn
Lane change
L
First gear
Lane change
Left turn
*
The engine switch must be “ON” and the brake pedal depressed to shift
from Park.
Front fog lights (if equipped)
Downshifting increases power going uphill, or provides engine braking
downhill. For best fuel economy during normal driving conditions, always
drive with the shift lever in the “D” position.
Turn
Tilt and telescopic steering wheel
Angle
Front fog lights come on only when the headlights are on low beam.
Length
Headlight beam level control (if equipped)
Up
Lock release lever
Up
Down
Hold wheel, push lever down, set angle and length, and return lever.
Down
Note: Do not attempt to adjust while the vehicle is in motion.
Higher number will lower the beam.
9
8
| Categories | Toyota Manuals, Toyota Sienna Manuals |
|---|---|
| Model Year | 2009 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)