FEATURES/OPERATIONS
Doors-Sliding
Console box (if equipped)
ON/OFF switch
Remove
Install
Front seat
Instrument panel
On
Off
Second row seat
Lock
release
lever
Push
Opening/Closing
Front overhead console
Center pillar
Auxiliary box
The console box can be removed and installed between the front or
second row seats.
To remove Open the auxiliary box on the rear side, and pull the lock
release lever. Lift the box from the rear to release it from the hook.
To install Place the hook into the striker. Lower box and push down to
engage the rear lock.
Open: Push
Close: Push again
Open: Push
Close: Push again
Power
Sliding doors will not fully open if the sliding door window is open.
•
•
When the engine switch is in the “ON” position, power sliding doors will
open only when gear selector is in the “P” (Park) position, and doors are
unlocked. Refer to the Owner’s Manual for more details.
An alarm will sound if a sliding door is open and the vehicle is shifted
out of Park.
Front seat console table (if equipped)
•
•
If battery is disconnected, the power sliding doors need to be
reinitialized. Refer to the Owner’s Manual for more details.
Lock release lever
Manual
•
Sliding doors will not lock into the open position if the sliding door
window is open.
Door-Power back (if equipped)
ON/OFF switch
Opening/Closing
Clock
Instrument panel
Front overhead console
With manual
With automatic
Air Conditioning system
Air Conditioning system
On
Off
Push
Open: Push
Close: Push again
Push
H- Hour set
M- Minute set
NOTE: If battery is disconnected, the power back door needs to be
reinitialized. Refer to the Owner’s Manual for more details.
12
13
| Categories | Toyota Manuals, Toyota Sienna Manuals |
|---|---|
| Model Year | 2009 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)