Features of your vehicle
FUEL FILLER LID
D100200AUN
Closing the fuel filler lid
1.
To install the cap, turn it clockwise until
it “clicks”. This indicates that the cap is
securely tightened.
2.
Close the fuel filler lid and push it in
lightly and making sure that it is
securely closed.
D100300AHM-EC
WARNING - Refueling
OHM048021N
OHM048022
•
If pressurized fuel sprays out, it
can cover your clothes or skin
and subject you to the risk of fire
and burns. Always remove the
fuel cap carefully and slowly. If
the cap is venting fuel or if you
hear a hissing sound, wait until
the condition stops before com-
pletely removing the cap.
D100100AHM
1. Stop the engine.
2.
Opening the fuel filler lid
To open the fuel filler lid, pull out the
fuel filler lid opener.
Pull open the fuel filler lid (1).
To remove the cap, turn the fuel filler
cap (2) counterclockwise.
The fuel filler lid must be opened from
inside the vehicle by pulling out the fuel
filler lid opener lever located on the dri-
ver’s door.
3.
4.
5.
Refuel as needed.
✽
NOTICE
If the fuel filler lid does not open
because ice has formed around it, tap
lightly or push on the lid to break the ice
and release the lid. Do not pry on the lid.
If necessary, spray around the lid with
an approved de-icer fluid (do not use
radiator anti-freeze) or move the vehicle
to a warm place and allow the ice to
melt.
• Do not "top off" after the nozzle
automatically shuts off when
refueling.
•
Tighten the cap until it clicks, oth-
erwise the Check Engine light
will illuminate.
•
Always check that the fuel cap is
installed securely to prevent fuel
spillage in the event of an acci-
dent.
4
27
| Categories | Kia Borrego Manuals, Kia Manuals |
|---|---|
| Model Year | 2010 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)