Features of your vehicle
8.
This is displayed when the current
broadcast is a stereo broadcast.
Stereo reception display
Selecting station through SEEK
This function is used to automatically select
channels through the SEEK function.
Storing station a preset button
Storing Manually
1.
To store the current station, use the 4-
direction key on the REAR panel or the
Remote Control to display the select
area and move it to the PRESET but-
ton desired for storing.
1.
After selecting one of the FM1/FM2/
AM modes, press the [SEEK] button
on the Remote Control to automatical-
ly search for stations with high-recep-
tion.
Methods of Station selection
Selecting station through Preset
This function allows station previously
saved to be selected for broadcast.
2. After positioning the select area to the
PRESET button desired for storing,
press the select key on the JOYSTICK
of the REAR panel or the select key on
the Remote Control for over 0.8 sec-
onds to store the current station.
1.
After selecting one of the FM1/FM2/
AM modes, move the select area to one
of the six preset buttons stored with the
broadcast station desired for listening
and press the ENTER key.
2.
In addition, press the [SEEK UP/DOWN]
on the remote control to increase or
decrease the station automatically to
search for high-reception stations.
Selecting a station through TUNE
This function allows the TUNE function to
be used to directly select the desired
broadcast station.
1.
After selecting one of the FM1/FM2/
AM modes, press the TUNE button to
increase or decrease the station in 1-
step increments (FM : 0.1MHz, AM :
9kHz). Use the TUNE button to select
the broadcast station desired for lis-
tening.
✽
NOTICE
✽
NOTICE
The SCAN function which automatical-
ly searches for broadcast stations with
superior reception is only supported by
the FRONT system. Using the SCAN
function through the FRONT system
will apply the same settings in the
REAR system.
The channels possible for preset are 6
channels each for FM1, FM2 and AM.
(Refer to [Chapter # Storing a broadcast
channel to a preset button] for more
information on storing presets)
2.
In addition, each time the [TUNE UP/
DOWN] button on the remote control is
pressed, the station will increase or
decrease.
4
195
| Categories | Kia Borrego Manuals, Kia Manuals |
|---|---|
| Model Year | 2010 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)