Warning lamp
Malfunction
The warning lamp lights up when
The warning lamp comes on when
cruise control is deactivated due
to control intervention by the DSC,
for example. A message appears on the
Control Display.
the system has failed. A message
appears on the Control Display.
More information can be found beginning on
page 84.
Resuming a speed stored beforehand
Active cruise control*
Press the button, arrow 4. The last stored
speed is resumed and maintained.
The concept
In the following instances, the stored speed is
deleted and can no longer be resumed:
With active cruise control, you can select a
desired speed which is not only automatically
maintained when driving on open roadways, but
also varied to maintain a selected distance set-
ting as slower traffic is encountered.
>
>
>
>
When driving stability control systems are
intervening
In cars with manual transmission: when you
shift gears very slowly or shift to neutral
Active cruise control is a technological advance
over the familiar cruise control and is a welcome
relief from the constant adjustment of speed
that can accompany driving in traffic on high-
ways or other high-speed thoroughfares. Espe-
cially on longer trips, the system can reduce
fatigue and tension, while increasing your
enjoyment of driving. Please use it safely and
responsibly.
In cars with automatic transmission: when
you engage selector lever position N
In cars with Sports automatic transmission
with double clutch: when you engage selec-
tor lever position N
>
When the ignition is switched off
Displays in the instrument cluster
Within the limits of its capability, the system
automatically adapts the car's speed to that of a
slower vehicle in front of you. You can specify
the distance to be maintained from the vehicle
in front in four stages. For safety reasons, the
distance is speed-dependent. Based on your
selected distance setting, the system automat-
ically decreases the throttle setting and lightly
applies the brakes if necessary. The vehicle
brake lamps will automatically illuminate to sig-
nal a following driver to take action. In addition,
it may be necessary for the vehicle or the driver
to downshift, depending on the kind of trans-
mission your vehicle is equipped with, to main-
tain the distance setting selected. If the vehicle
ahead speeds up or when the lane ahead
1
2
Stored speed
Selected speed is displayed briefly
If --- mph or --- km/h temporarily appears
in the instrument cluster display, it is pos-
sible that the system prerequisites for operation
are currently not met.
Calling up Check Control messages, refer to
page 85.<
becomes clear, your vehicle will accelerate to
the speed you have selected by increasing the
throttle setting and shifting gears automatically
or by the driver as needed. Your selected speed
will be held when driving downhill, too.
68
Online Edition for Part no. 01 41 2 604 638 - © 02/10 BMW AG
| Categories | BMW 3-Series Manuals, BMW M3 Manuals, BMW Manuals |
|---|---|
| Tags | BMW 328i, BMW 328i xDrive, BMW 335i, BMW 335i xDrive, BMW 335is, BMW E90, BMW E92, BMW E93, BMW M3 Manuals |
| Model Year | 2011 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)