Telephone*
At a glance
1.
2.
3.
4.
"Telephone"
"Options"
The concept
"Bluetooth info"
"Display system information"
After the mobile phone is paired once with the
vehicle, the mobile phone can be operated using
the iDrive, the steering wheel buttons and voice
activation*.
These approved mobile phones with a certain
software version, support the vehicle functions
described below.
A paired mobile phone is automatically detected
as soon as it is located inside the vehicle, when
the ignition is switched on.
Malfunctions may occur with other mobile
phones or software versions.
Up to four mobile phones can be paired.
Using the mobile phone while driving
Donot operate a mobile phonethat isconnected
to the vehicle on the mobile phone keypad, as
this may lead to a malfunction.
Make entries only when traffic and road
conditions allow. Do not hold the mobile phone
in your hand while you are driving; use the
hands-free system instead. If you do not ob‐
serve this precaution, you can endanger the ve‐
hicle occupants and other road users.◀
Pairing/unpairing the mobile
phone
Requirements
▷
▷
▷
The mobile phone is suitable.
Snap-in adapter*
The mobile phone is ready for operation.
The snap-in adapter is used to:
Bluetooth is activated on the vehicle, refer to
page 167, and on the mobile phone.
▷
▷
▷
Hold the mobile phone.
Recharge the battery.
▷
Bluetooth presettings may need to be made
on the mobile phone, e.g., for a connection
without confirmation or visibility, refer to the
mobile phone operating instructions.
Connect the mobile phone to an outside an‐
tenna of the vehicle.
This provides for better network reception
and consistent sound quality.
▷
▷
A number with at least four and a maximum
of 16 digits is defined as the Bluetooth pass‐
key. It is only required once for pairing.
Approved mobile phones
Details on which mobile phones with a Blue‐
tooth interface are supported by the mobile
phone preparation package can be obtained at
www.bmw.com/bluetooth.
The ignition is switched on.
Pairing and connecting
Pairing the mobile phone
Displaying the vehicle identification
number and software part number
To avoid becoming distracted and posing
an unnecessary hazard both to your own vehi‐
cle's occupants and to other road users, only
pair the mobile phone while the vehicle is sta‐
tionary.◀
The vehicle identification number and software
part number are needed to determine which mo‐
bile phones are supported by the mobile phone
preparation package. The software version of
the mobile phone may also be required.
1.
2.
"Telephone"
"Bluetooth (telephone)"
166
Online Edition for Part no. 01 41 2 604 231 - 03 10 500
| Categories | BMW Manuals, BMW Z-Series Manuals |
|---|---|
| Tags | BMW E89, BMW sDrive35is, BMW Z4 sDrive35i, sDrive30i |
| Model Year | 2011 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)