rear wheels are blocked and the vehicle cannot
be towed.
Release the transmission lock manually for tow‐
ing only and set the parking brake beforehand to
prevent the vehicle from rolling. After parking
the vehicle, engage the transmission lock again
manually, refer to page 61.
Manual release
1.
2.
Unclip the sleeve of the selector lever.
6.
7.
Turn the Allen wrench as far as it will go, ar‐
row 2. The transmission lock is released.
Pull the sleeve up over the selector lever un‐
til the sleeve is inside out.
Draw the Allen wrench out of the opening.
Locking the transmission lock again
After parking the vehicle, lock the trans‐
mission lock again to prevent the vehicle from
rolling.◀
Locking manually
1.
Press the button, see arrow. The transmis‐
sion lock is locked again.
3.
Insert the Allen wrench from the onboard
vehicle tool kit, refer to page 204, into the
cap.
2.
3.
Clip the sleeve of the selector lever back in
place.
Set the parking brake.
Jump-starting, refer to page 210, towing, refer
to page 211.
4.
5.
Turn the cap with the Allen wrench, arrow 1,
and remove it, arrow 2.
Insert the Allen wrench into the opening, ar‐
row 1.
Turn the Allen wrench in the correct
direction.
Do not turn the Allen wrench in the opposite
direction as this may damage the mecha‐
nism.◀
61
Online Edition for Part no. 01 41 2 604 231 - 03 10 500
| Categories | BMW Manuals, BMW Z-Series Manuals |
|---|---|
| Tags | BMW E89, BMW sDrive35is, BMW Z4 sDrive35i, sDrive30i |
| Model Year | 2011 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)