DRIVING YOUR HYUNDAI
2
5
C050A01A-AAT
STARTING
C051A01O-GAT
STARTING FOR THE DIESEL
ENGINE
C050B01HR-GAT
NORMAL CONDITIONS
The Starting Procedure:
ENGINE COLD
1. Insert key, and fasten the seat belt.
2. Depress the clutch pedal fully and
place the gearshift lever in neutral.
3. After turning the ignition key to the
"ON"position,makecertainallwarn-
ing lights and gauges are function-
ing properly before starting the en-
gine.
o Turn the ignition key to position
"ON" and wait for the pre-heat indi-
cator light to go out.
o Operate the starter until the engine
runs.
ENGINE WARM
4.
On vehicles equipped with the die-
sel preheat indicator light, turn the
ignition key to the "ON" position.
The diesel pre-heat indicator light
will first illuminate in amber, and
then after a short time, the amber
illumination will go off, indicating
that preheating is completed.
Operate the starter. If the engine does
not respond on the first attempt, wait
several seconds and try again using
the pre-heat.
C050A01E-1
!
WARNING:
Never run the engine in a closed or
poorly ventilated area any longer
than is needed to move your car in
or out of the area. The carbon mon-
oxide gas emitted is odorless and
can cause serious injury or death.
| Categories | Hyundai Manuals, Hyundai H-100 Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, H-100 |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)