DO-IT-YOURSELF MAINTENANCE
6
HEADLIGHT AIMING
ADJUSTMENT
29
NOTE:
G290A01FC-GAT
It is recommended that water accu-
mulated in the fuel filter should be
removed by an authorized Hyundai
dealer.
Before performing aiming adjustment,
make sure of the following.
Vertical aiming
1. Keep all tires inflated to the correct
pressure.
2.
Place the vehicle on level ground
andpressthefrontbumperandrear
bumper down several times. Place
the vehicle at a distance of 3,000
mm (118 in.) from the test wall.
See that the vehicle is unloaded
!
WARNING:
o Do not smoke or have any other
openflamenearthevehiclewhile
bleeding the fuel system.
Horizontal
aiming
G290A01HR
3.
o Besuretocarefullywipeawayany
water drained out in this manner,
because the fuel mixed in the wa-
termightbeignitedandresultina
fire.
(
except for full levels of coolant,
7. Adjust each cut-off line of the low
beamtotheparallellinewithaphillips
screwdriver - VERTICAL AIMING.
8. Adjust each cut-off line of the low
beam to each vertical line with a
phillipsscrewdriver-HORIZONTAL
AIMING.
engine oil and fuel, and spare tire,
jack, and tools).
. Clean the head lights lens and turn
on the headlight (low beam).
. Open the hood.
. Draw the vertical line (through the
center of each headlight beam pat-
tern)andthehorizontalline(through
the center of each headlight beam
pattern) on the aiming screen.
4
5
6
And then, draw a horizontal parallel
line at 30 mm (1.18 in.) under the
horizontal line.
| Categories | Hyundai Manuals, Hyundai H-100 Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, H-100 |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)