Features of your vehicle
Programming HomeLink
✽
•
®
Standard programming
To train most devices, follow these
instructions:
5. Press and hold the just-trained
HomeLink button and observe the red
®
Status Indicator LED. If the indicator
light stays on constantly, programming
is complete and your device should
®
activate when the HomeLink button is
pressed and released.
NOTICE
When programming a garage door
opener, it is advised to park the vehi-
cle outside of the garage.
1. For first-time programming, press and
buttons,
hold
the
two
outside
•
It is recommended that a new battery
be placed in the hand-held transmit-
ter of the device being programmed to
HomeLink® Channel 1 and Channel 3
Buttons, until the indicator light begins
to flash (after 20 seconds). Release
both buttons. Do not hold the buttons
for longer than 30 seconds.
6. To
program the remaining two
HomeLink buttons, follow steps 2
®
through 5.
HomeLink for quicker training and
®
accurate transaxle of the radio-fre-
quency signal.
2.
3.
4.
Position the end of your hand-held
transmitter 1-3 inches (2-8 cm) away
•
•
Some vehicles may require the igni-
tion switch to be turned to the second
(or "accessories") position for pro-
Rolling code programming
from the HomeLink
®
buttons while
Rolling code devices which are "code-
protected" and manufactured after 1996
may be determined by the following:
• Reference the device owner's manual
for verification.
keeping the indicator light in view.
gramming
HomeLink.
and/or
operation
of
Simultaneously press and hold both
the HomeLink
®
and hand-held trans-
In the event that there are still pro-
gramming difficulties or questions
after following the programming steps
mitter button. DO NOT release the but-
tons until step 4 has been completed.
•
The handheld transmitter appears to
program the HomeLink ® Universal
While continuing to hold the buttons
the red Indicator Status LED will flash
listed below, contact HomeLink
at:
or 1-800-355-
®
Transceiver but does not activate the
device.
www.homelink.com
3515.
slowly
and then rapidly after
®
HomeLink successfully trains to the
•
Press and hold the trained HomeLink
button. The device has the rolling code
feature if the indicator light flashes rap-
idly and then turns solid after 2 sec-
onds.
frequency signal from the hand-held
transmitter. Release both buttons.
4
41
Product Specification
Categories | Hyundai Manuals, Hyundai Sonata Manuals |
---|---|
Tags | Hyundai Sonata 2.4 |
Model Year | 2011 |
Download File |
|
Document Type | Owners Manual |
Language | English |
Product Brand | Hyundai, Sonata |
Document File Type | |
Copyright | Attribution Non-commercial |