Driving your vehicle
ACC (Accessory)
START
Without the immobilizer
The steering wheel is unlocked and elec-
trical accessories are operative.
Turn the ignition switch to the START
position to start the engine. The engine
will crank until you release the key; then
it returns to the ON position. The brake
warning lamp can be checked in this
position.
✽
NOTICE
If difficulty is experienced in turning the
ignition switch to the ACC position, turn
the key while turning the steering wheel
right and left to release the tension.
WARNING - Ignition
switch
•
•
Never turn the ignition switch to
LOCK or ACC while the vehicle is
moving. This would result in loss
of directional control and braking
function, which could cause an
accident.
The anti-theft steering column lock
is not a substitute for the parking
brake. Before leaving the driver’s
seat, always make sure the shift
lever is engaged in P (Park) set the
parking brake fully and shut the
engine off. Unexpected and sud-
den vehicle movement may occur
if these precautions are not taken.
With the immobilizer
The electrical accessories are opera-
tive.
OYF059016
Ignition switch position
LOCK
ON
Without the immobilizer
The warning lights can be checked
before the engine is started. This is the
normal running position after the engine
is started.
Do not leave the ignition switch ON if the
engine is not running to prevent battery
discharge.
The steering wheel locks to protect
against theft. The ignition key can be
removed only in the LOCK position.
When turning the ignition switch to the
LOCK position, push the key inward at
the ACC position and turn the key toward
the LOCK position.
With the immobilizer
The ignition key can be removed only in
the LOCK position.
(Continued)
5
5
Product Specification
Categories | Hyundai Manuals, Hyundai Sonata Manuals |
---|---|
Tags | Hyundai Sonata 2.4 |
Model Year | 2011 |
Download File |
|
Document Type | Owners Manual |
Language | English |
Product Brand | Hyundai, Sonata |
Document File Type | |
Copyright | Attribution Non-commercial |