Maintenance
AUTOMATIC TRANSAXLE FLUID (IF EQUIPPED)
2.
After the transaxle is warmed up suffi-
ciently (fluid temperature 70~80°C
for example by 10 min-
(158~176°F),
utes usual driving, move the shift lever
through all the positions then place the
shift lever in “N (Neutral) or P (Park)”
position.
OPB079008
OHD076045N
G100100APB
3. Confirm that the fluid level is in “HOT”
range on the level gauge. If the fluid
level is lower, add the specified fluid in
the fill hole. If the fluid level is higher,
drain the fluid from the drain hole.
Checking the automatic transaxle
fluid level
The automatic transaxle fluid level
should be checked regularly.
4.
If the fluid level is checked in cold con-
dition (fluid temperature 20~30°C
(68~86°F) add the fluid to “C” (COLD)
Keep the vehicle on the level ground with
the parking brake applied and check the
fluid level according to the following pro-
cedure.
line and then recheck the fluid level
according to the above step 2.
1.
Place the shift lever in N (Neutral)
position and confirm the engine is run-
ning at normal idle speed.
7
35
| Categories | Hyundai Manuals, Hyundai i20 Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, i20 |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)